Malt Analysis Sheets

Replies to This Discussion

Permalink Reply by jt on February 13, 2008 at 7:57am

I think David Cryer had some on his .com.au websire and I thought I'd seen some on the weyermann website. Not sure about Bairds though. Suggest you ask your supplier maybe ?

• ▶ Reply

Permalink Reply by jt on February 13, 2008 at 8:09am

Try this http://www.cryermalt.com.au/certificatesofanalysis-weyermann

Bairds list this info here, http://www.bairds-malt.co.uk/main_frame.htm

Typical Pale Ale Malt Specification:

ASBC IOB EBC
Moisture % 3 max 3 max 3 max
Extract fine grind dry basis % 82 308 82
Fine-coarse difference % 1-2 1-2
Colour ° 2-3 4-6 5-7
Protein % 9.75 max 1.55 max 1.55 max
Soluble/Total Protein % 40-45 36-42 40-45
Diastatic Power °L 45 min 45 min 150 min

• ▶ Reply

Permalink Reply by denimglen on February 13, 2008 at 4:32pm

Cheers, I'd seen the Baird's and Weyermann's you showed but both don't show all the available malts, a good start though.

I'll hit up Mike next time I see him, just feel bad about asking for the specs on like 18 different malts haha. Was hoping on the off-chance someone might have them all in PDF or something.

• ▶ Reply

Permalink Reply by Andrew R on April 27, 2009 at 6:52pm

I've just bought a copy of beersmith and was wondering the same things about the malts. Did you manage to get a file that you might be willing to share?

• ▶ Reply

Permalink Reply by denimglen on April 27, 2009 at 7:18pm

You can get all Weyermanns as a download from Beersmith's website.

I've got the analysis loaded for Barett Burston's Pale, but that's not being sold anymore, and also ADM pils and Baird's Pale Ale malt. If you want the files give me a holla.

If you're buying your grain from Mike at Brewer's Coop he should be happy to give you the analysis sheets, most suppliers would to I think.

For coloured malts I was using the closest malt in the list and just adjusting the colour to what I got from Mike. I figured the small amount being used the potential extract and other values weren't too critcal.

• ▶ Reply

Permalink Reply by Andrew R on April 27, 2009 at 7:29pm

Thanks for that - I did find the Weyermanns and have duly imported it. I'll get the analysis sheets and work from there. I'll do it as I go so it doesn't feel like I'm doing too much computer stuff :-)

Being new to the game I've got a LOT more to worry about than getting too technical - just looking at keeping a decent log of what I've done.

Cheers.

• ▶ Reply

Permalink Reply by Brendon on April 30, 2009 at 5:23pm

We used to get the malt analysis sheets for the products that we stock. It is different from batch to batch as you might expect. I can try and dig out what we have for those malts. I can attach them to our products on the website.
Cheers,
Brendon

www.libertybrewing.co.nz

• ▶ Reply

Permalink Reply by Brendon on May 1, 2009 at 1:05pm

check out http://www.libertybrewing.co.nz/?q=node/74

be aware - these are quite old analysis sheets and from batches we might not necessarily stock.

• ▶ Reply

Permalink Reply by denimglen on May 5, 2009 at 8:28pm

Ok is this me after a few pints on a Tuesday night or can I not find anything?

• ▶ Reply

Permalink Reply by James P on May 6, 2009 at 8:15am

I must have had one too many last night too, as I cannot find em on the website....

• ▶ Reply

Permalink Reply by Mike Neilson on May 6, 2009 at 8:31am

Every time I click on the link above I get them!!

• ▶ Reply

Permalink Reply by James P on May 6, 2009 at 8:56am

Ah, it's Internet Explorer 8 that has the issue. Brendon, can you modify your http source to render in IE7?

meta http-equiv="X-UA-Compatible" content="IE=EmulateIE7"

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page