Getting hold of a couple of old kegs

Replies to This Discussion

Permalink Reply by Greig McGill on May 26, 2009 at 10:55am

Try your local scrap metal place. They almost always have tons of the things.

• ▶ Reply

Permalink Reply by Simon David kelly on May 26, 2009 at 12:17pm

Thanks Greig, I'll give it a go.

Cheers

Si

• ▶ Reply

Permalink Reply by denimglen on May 26, 2009 at 6:05pm

Yup, scrap dealer is where I scored mine.

• ▶ Reply

Permalink Reply by Ian on May 27, 2009 at 10:37am

I had a yarn to my local offsales and they tee'd me up with a keg in GOOD nick from one of their brewery reps.

• ▶ Reply

Permalink Reply by Ian on May 27, 2009 at 10:55am

My 'legitimate' keg via the brewery was $90 and was in excellent condition, but I reckon from a scrap yard you'd be looking at around $50 to $60

• ▶ Reply

Permalink Reply by Greig McGill on May 27, 2009 at 10:57am

I paid $40 each for mine from Scrap Palace in Hamilton.

• ▶ Reply

Permalink Reply by Simon David kelly on May 27, 2009 at 1:03pm

I've checked all the local scrap yards with emails and they're all out. Could be a road trip in a few weeks for personal visits to the rest.

On the off chance I mailed Lion Nathan directly, but I think I'm pushing my luck there :o)

I've had an idea to possibly get a water boiler tank (180lt Rheem), cut it in half, use the bottom (with the element) as the boiler and the top half upside down as the mash tun.

Anyone see any issues with it?

Si

• ▶ Reply

Permalink Reply by Simon David kelly on May 27, 2009 at 1:52pm

Thanks for the heads up on the enamel.

• ▶ Reply

Permalink Reply by Rusty Chch on May 27, 2009 at 3:09pm

I'm no plumber but I saw a discussion about this on Aussie Home Brewer a while back*.

There was some mention of "sacrificial anodes" which I think is some metal which corrodes faster than copper. Being that it's easily corroded, there's a danger** that stuff would leech into your liquor.

Might be worth a look on there to see what they say

* My recall is a bit hazy on the upshot
** The degree of danger is a whole other question.

• ▶ Reply

Permalink Reply by Rusty Chch on May 27, 2009 at 3:31pm

I'm no gynaecologist but I'll take a look at it for ya!

I don't think the problem was copper dissolution, more that sacrificial anodes were less delicious metals.

Anyway, here's the thread, looks like the final call is bullshit but hey forewarned is forearmed

• ▶ Reply

Permalink Reply by James P on May 27, 2009 at 3:42pm

Stu K. Phinga
OBGYN

Permalink Reply by Ian on May 29, 2009 at 9:04am

Simon,
Before I scored my keg from the offsales over the road (via their brewery rep) I phoned the Speights guys down South and they called me bacck a couple of weeks later to offer me a keg or two, which I didn't need any longer. But they do flick the old kegs off from time to time so it is worth a call - but I'd suggest with thee larger breweries that you phone them rather than email to get to chat to someone who knows.

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page