Conical Fermentors

Replies to This Discussion

Permalink Reply by Stu McKinlay on May 19, 2008 at 3:56pm

It's not conical but in case anyone is interested:
http://www.trademe.co.nz/Crafts/Other/auction-155955467.htm

• ▶ Reply

Permalink Reply by Barry on May 19, 2008 at 7:01pm

$600 for a corny and a big pot with a tap. Sure it has legs and is kind of "set up" but that's a bit pricey isn't it?
Or am I just getting to be a cheap bugger in my old age...

• ▶ Reply

Permalink Reply by Reuben Rowntree on October 16, 2011 at 7:21pm

Has anybody got any new recommendations on this? I'm interested in a 50L SS conical. Cheers

• ▶ Reply

Permalink Reply by Ralph on October 17, 2011 at 9:43am

http://www.inibrewsupply.com/ferment/ for Blichmann bling. Aint cheap but is here in NZ.

• ▶ Reply

Permalink Reply by Andrew on October 17, 2011 at 9:39am

I was in contact with these guys in China a while back : http://www.hsmachine.com/ .  630 USD for a 50 ltr cinical but they will only ship a minimum of 5 ata time so you'd need a few people in with you unless you want 5 all for yourself.

 

I know a few welders and asked for a quote for a bog standard 50 ltr fermenter and got quoted $600 and that is because he knows me and we doing a cheap quote. The expensive part is getting the cone rolled and the valve. What he planned to do was just buy a short piece of a wide diameter SS pipe, put a come and legs on one end and a lid on the other. A few hundred $$ doens't get you much nowadays!!

 

Needless to say I,m still using my plastic FV I got for free and making beer that is more than drinkable.

• ▶ Reply

Permalink Reply by Chris Banks on October 17, 2011 at 10:08am

Suprised no ones mentioned Farra's ones? http://www.farra.co.nz/products.php

• ▶ Reply

Permalink Reply by Chris Mills on October 18, 2011 at 7:28am

I've been happy with the ones I got from Farra.

One of the key features that I like is that I can easily cap my beer and carbonate it at the tail end of fermentation. With some beers this makes it possible to keg conditioned beer within 8-10 days of brewing. I've fitted some adjustable pressure relief valves to the valves on the lids and don't worry about blowing them up (I set the PRV to 1.1 bar /15 psi).

For very active fermentations I fit a blow-off hose to the lid instead of the PRV.

I got my conicals with a 152mm threaded opening for the lid so I could fit my arm inside to scrub away any deposits from fermentation.

• ▶ Reply

Permalink Reply by Paul Wicksteed - another1 on October 17, 2011 at 10:54am

I was going to, but instead I thought that you might have a go at fabricating them.

• ▶ Reply

Permalink Reply by vince costanzo on October 19, 2011 at 12:18am

Keg King in Melbourne have good priced S/S conical fermenters from 30L to 100L.

http://www.kegking.com.au/

 

• ▶ Reply

Permalink Reply by donald stewart on October 19, 2011 at 9:04pm

i have one made by steve the boss from farra , looks great from the out side BUT THE WELDING ON THE INSIDE IS SH1T!!!!  paid $450.00 + freight  . it was a wast of money , should have saved a bit longer and got one with on welding on the inside. thats how bad it is on the inside

• ▶ Reply

Permalink Reply by mattd2 on October 19, 2011 at 10:03pm

What exactly is bad about the welding, can you share some pics to show us what to look out for? I can't imagine a shop that deals with a fair amount of SS to not back purge or anything like that? Is there lack of fusion on the backside of the weld? I would think it to be near impossible for anyone to be able to weld on the inside of a vessel so small. What did Farra say about it?

Sorry about the 20 Qs, Cheers!

• ▶ Reply

Permalink Reply by donald stewart on October 20, 2011 at 6:56am

hi will try and get some photos over the week end

big dags of weld on the cone to body and gaps wear the fusion has not gone right though and black pits wear the legs have been welded on 

i had the racking cane and the tri clamp fitting on the valve welded at crown in invers and the welds are so good 

 

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• 4
• …
• 25
• Next ›
• Page