Home Bar - fitting help
I'm trying to set the last leg of my home keg system up, but am finding it tough to get the fittings!
I have 2 x 25l and 2 x 50l commercial kegs, and a 4 tap dispenser.
I currently have 2 keg couplers, and will probably stick with 2 at this stage so I can let 2 kegs naturally carb while I sup on the other 2:)
Plumbing stores don't seem to have the fittings from coupler to tube, tube to a cool plastic fitting that fits into the commercial tap.
I guess contact the brewery supplier for fittings?
Any ideas around chch, or a company I can email?
Chur.
Replies to This Discussion
-
Permalink Reply by Hamish Jones on
-
I'd try someone like blackwoods, enzed or HCD they may have something with the right thread with a barb on it that will go close, can't imagine brewery supplies would be that cheap,
-
Permalink Reply by Haish on
-
Hoshizaki Lancer have everything you need. They're in Auckland but should be able to help you out via email.
Help Fund This Site
FRESH LIQUID YEAST!!!
DIRECT FROM THE LAB
Luke's Beer+
Events
© 2024 Created by nzbrewer.
Powered by
