Food-grade tube
Hi all,
I'm now very close to getting my AG setup operational. One of the few things left to source is a short legnth (~150mm) of flexible food-grade tube with an ID of 1/2" to ~15mm (silicon would be ideal). I need it to attach the outlet of the mashtun manifold to the bulkhead fitting.
Any ideas where I could get hold of an offcut, ideally somewhere around Wgtn?
Thanks,
John
Replies to This Discussion
-
Permalink Reply by Tadd Clayton on
-
I don't know about an offcut, but I was able to get some plastic tube from Plastic Box. I think Mitre 10 Mega stock various sizes of plastic tube as well.Good luck,
Tadd
-
Permalink Reply by Grant R Baker on
-
thebrewhouse and brewshop sell 12mm (internal) silicon tubing. Connects nicely over all my 1/2" SS connectors.
-
Permalink Reply by Slingshot on
-
Nice one, thanks. Neither of those sites had popped up in my extensive googling :)
-
Permalink Reply by Eugene Black on
-
Silicon is the best for anything over ~65deg PVC will start to leach off flavours
Help Fund This Site
FRESH LIQUID YEAST!!!
DIRECT FROM THE LAB
Luke's Beer+
Events
© 2024 Created by nzbrewer.
Powered by
