Slant Trade

Replies to This Discussion

Permalink Reply by Jordan on November 17, 2011 at 11:32am

Sounds interesting Martin. I might do a bit of research and if it looks good test it out. Will let you know how I go.

• ▶ Reply

Permalink Reply by Andy on December 30, 2011 at 12:46pm

Hi Jordan

Im happy to swap, i have 1272 and 2112.  If you want the 2112 i can prepare the slide and send blanks for some of the others as well, as i have a few spare.

• ▶ Reply

Permalink Reply by Jordan on December 31, 2011 at 9:35am

Messaged you now andy.

• ▶ Reply

Permalink Reply by Liam Callaghan on December 31, 2011 at 9:47am

Hey guys, I am gearing up for slants early in the new year and happy to contribute.  

I don't have any yeasts apart from dry yeast cultures atm but if you let me know a strain that you are looking for and currently don't have, I will buy those and cultivate to share it - might need someone to collate what everyone else has I guess.  There is a similar discussion in General I think as well.

It might be end of Feb before I am up and running, maybe march if I run a few tests with them.

• ▶ Reply

Permalink Reply by Liam Callaghan on February 25, 2012 at 9:02am

Glassware finally arrived after a couple week delay.  Workshop is almost ready to brew in again so hopefully brewing on the weekend + taking my first slants and canning my first wort!  Better late than never haha

I'll let you know how I get on Jordan.

• ▶ Reply

Permalink Reply by martin w on May 10, 2012 at 8:17pm

anyone still keen on a trade? i'm in the process of getting my bank sorted out after neglecting it for a while-busy with work/life etc- i'm going to slant a few new strains,if anyone's still keen i'll post what i have available when they've been done.

• ▶ Reply

Permalink Reply by Tony Adams on May 11, 2012 at 9:20am

Hello

I will be interested in swapping slants. Currently just getting setup. Where are people buying suitable screw top test tubes for making slants?

• ▶ Reply

Permalink Reply by Grant R Baker on May 11, 2012 at 5:30pm

LabWarehouse

Got mine from here... I use the 25mm*125mm with screw top lids.

• ▶ Reply

Permalink Reply by Liam Callaghan on May 14, 2012 at 5:28pm

I got mine from Alphatech

http://www.alphatech.co.nz/

I ended up buying everything from them.  I got these links off Chris previously.

http://bit.ly/wyC49n (burner)
http://bit.ly/w5aFku (loop) - you could make your own, but this one is purpose built.

I got glass vials from Alphatech (http://www.alphatech.co.nz/) - contact Steve Lawson

Clear Glass Vials -  24/400 28X95 (carton of 100)    part num: ALL98912 ~$60.

White Polypropylene caps 24/400 w/ PTFE/silicone seal (bag of 100) part# ALL99054 ~$70.

Oh and I am up for a trade, I think Jordan was managing them, he might still be on his jollies though...  He has a pretty good selection.

• ▶ Reply

Permalink Reply by Liam Callaghan on July 18, 2012 at 7:11am

Anyone have a Wyeast 2565 Kolsh?

• ▶ Reply

Permalink Reply by Tony Adams on February 20, 2013 at 2:55pm

I have around 75 glass vials to sell. From here http://www.discountvials.com/2-Dram-Glass-Vials-s/239.htm. They are 17 x 60mm with teflon line polypropylene lids, they are autoclavable. I am selling these at cost for $1 each + postage in lots of 10 or more.

Anyone interested?. 

• ▶ Reply

Permalink Reply by Tilt on February 20, 2013 at 4:47pm

I'd be interested Tony - 40 should do me.  Where are you based?

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• 4
• Next ›
• Page