KEGWORKS

Replies to This Discussion

Permalink Reply by Ian on July 22, 2011 at 11:40am

Great site, Hugh, thanks for sharing. The prices look pretty sharp too - don't know about freight though.

• ▶ Reply

Permalink Reply by Richard Jack on July 22, 2011 at 12:41pm

Just putting it out there, I have to get 1 more Perlick faucet (it's just killing me that I have one odd tap on the post) so I'd be keen to share shipping with someone if they're also thinking about an order.

• ▶ Reply

Permalink Reply by Hugh Grierson on July 22, 2011 at 1:46pm

Richard, could be keen, the perlick equipment seems a step up from the usual China stuff.. might get back to you on monday.

As far as freight goes..you pay, it cost $668 all up for a drained ss drip tray, two tap brass beer tower, the keg coupler and four cornie connectors, total cost around $300, so freight was over $330. Still worked out fairly good for stuff I could not find locally.

• ▶ Reply

Permalink Reply by Richard Jack on July 22, 2011 at 1:58pm

Seriously? Ouch. From the "beer tap store" on ebay (seller: brauman59) I was getting perlick tap / SS 4" shank / handle combos for about $75-80NZ including shipping when I last ordered... The shipping component for 4 of them was about $40 I think, so ~$10 each. I've actually got a shank for the last one to go on, so I just need to buy the faucet. They're certainly nice units.

• ▶ Reply

Permalink Reply by Liz Chatterton on July 26, 2011 at 12:39am

Thanks for the kind comments Hugh - I work for KegWorks and we're glad you were able to get what you needed! We work with another company to handle international shipping - but if the prices seem high you can feel free to contact our customer service department and they'll make sure you're getting the most reasonable rate. 

 

Thanks again for your order! Cheers! 

• ▶ Reply