Who does CO2 refills in Christchurch + Sanke fittings?
Hi all,
Am well on the way to getting a keg setup up and going but need to know where to refill a CO2 bottle?
Also I have a couple of Sanke connectors (to go with the Sanke kegs) but I am a bit short on connectors that would go from the coupler to the hose. I think it is a 5/8ths threaded nut with a barb that will fit about a 6mm line that I need. Anyone know if I can get hold of these here in NZ or is it easier to import a few?
Thanks!
Replies to This Discussion
-
Permalink Reply by David Williams on
-
Asco in Hornby for CO2. Rocked up the other day $30 for a refill.
-
Permalink Reply by Ralph on
-
Nah, wrong thread on the nut (way too small), but that is the sort of thing I am looking for.
-
Permalink Reply by Dougal on
-
Oops. Not thinking! I'd read 6.35mm as the thread size, not the line ID.
-
Permalink Reply by Chris Mills on
-
If you are using some 6mm PVC tubing, then connect this to one end:
http://www.ultraflow.co.nz/cs/prodList.asp?idCategory=55
And fit it into a 5/8x5/16 female gas coupler (I use these on both the gas and beer connectors on my Micromatic Sanke adapters):
http://www.ultraflow.co.nz/cs/prodList.asp?idCategory=65&TestTr...
-
-
Nice. Thanks Chris. I assume Ultra flow sell to public and are happy to ship?
-
-
I've only ever done cash sales for a few pieces at a time and I can't imagine they'd turn away business. You might have a little trouble getting an order filled this week, but in the new year it should be fine. Let me know if you get stuck.
Help Fund This Site
FRESH LIQUID YEAST!!!
DIRECT FROM THE LAB
Luke's Beer+
Events
© 2024 Created by nzbrewer.
Powered by
