Selling a bunch of SS fittings, valves etc
COILS
3x 2" double-wound coils (4m 1/4" tube) (long tails)
1x 2" double-wound copper coil (4m 1/4" tube) (short tails)
1x 4" double-wound copper coil (7.5m 3/8" tube)(short tails)
VALVES
2x 1/2" BSP 2-piece ball-valve (316SS) (1/2" BORE)
1x 1/2" BSP 3-piece ball-valve (316SS) (1/2" BORE)
1x 1" BSP 3-piece ball-valve (316SS) (1" BORE)
1x 1" tri-clamp 2-piece ball-valve (304SS) (3/4" BORE)
COUPLINGS ETC
3x 2" TC coupling (ferrule-to-ferrule)
2x 2" TC coupling (ferrule-to-cap)
11x 3" TC coupling
1x 3" RJT coupling (thread-to-ferrule)
1x 4" RJT blank cap
1x 4" RJT Hex Nut
3x 2" Tri-Clamp
1x 2" Tri-Blank Cap
1x 1.5" Tri-Blank
FITTINGS ETC
1x 2" 90-degree bend (304SS)
4x 1/2" 90-degree bend (304SS)
1x 5/8" 90-degree bend (304SS)
1x 1" tee (304SS)
1x 1/2" tee (304SS)
2x 1"x2" reducer (304SS)
1x 1.5"x2" reducer (304SS)
1x 0.5"x1" reducer (304SS)
1x 1"x2" Tri-Clamp reducer
1x 90-degree 1/2" BSP elbow
2x 1" BSP to 1" tube reducing nipple (316SS)
1x 1" BSP weld nipple (316SS)
1x 1/2" BSP male-to-male threaded adapter (316SS)
1x 1/2" BSP weld-socket (threaded) (304SS)
1/2" BSP MAC union (316SS)
3/8" BSP hose-barb (316SS)
4x 1" A-Justa-Feet (not pictured)
STILL STUFF
3x 2"x16" COLUMN SECTIONS (2" TC each end) (304SS)
1x 1"x2" tee (tri-clamp each leg)
1x 1" 90-degree elbow (tri-clamp ferrule each end) (304SS)
HEAT EXCHANGER
1x 2"x20" PRODUCT CONDENSER (5x 1/2" copper tube inside, 1" TC ferrule one end, leak-free, hose-barbs etc)
- Attachments:
-
-
coils.jpg, 85 KB -
fittingsetc.jpg, 86 KB
-
couplings.jpg, 93 KB
-
Replies to This Discussion
-
Permalink Reply by Peter Greer on
-
Images attached to this and first post!
Selling due to some recent family issues which preclude projects etc. Would like 350 for the whole lot ideally, but could break it up. That's cheap as hell (even for just the 3" TCs it would be cheap) so I wont move too much on it.. Message me. Like them to go ASAP!
- Attachments:
-
-
stillparts1.jpg, 72 KB
-
-
Permalink Reply by martin w on
-
are the parts for a vm reflux still? what would be required to finish the still(apart from keg/element)? i might be interested
-
-
Is this gear still for sale, I'm interested if it is.
-
-
Hi, I'd like to add a ball valve to my pot this weekend. Do you still have the 1x 1/2" BSP 3-piece ball-valve ?
-
Permalink Reply by Chris Banks on
-
Does anyone on here know Peter ? I am trying to get hold of him.
Help Fund This Site
FRESH LIQUID YEAST!!!
DIRECT FROM THE LAB
Luke's Beer+
Events
© 2024 Created by nzbrewer.
Powered by
