Want to place an ad email luke@realbeer.co.nz
$50+GST / month

RealBeer.co.nz

ALL SOLD THANKS GUYS

 

Hi,

 

Upgrading my equipment so selling the following. Pickup is Grey Lynn AK.

Workmaship on fittings etc is homemade, but everything is water/wort-tight!

 

Catermaster 40L 3kw hot water urn with sight glass (not graduated - but every 1cm = 1L. Have a few markings on there). Lid is a bit wobbly and discoloured. Ball valve on long brass nipple, brass pickup tube (good to overhang your mash tun for gravity feeding). $200. Heats up in a flash.  SOLD

 

Kettle - 70L. Sight glass installed with 'vivid drawn on' graduations. Brass nipple, weldless and Ball valve and copper/brass pick up tube. Brass garden male disconnect. Blichmann thermometer in F. $180.

 

42L Mash Tun. Has a brass nipple and stainless ball valve. Perforated removable false bottom from Craft-brewer. Copper pickup tube with brass connections. Brass garden male disconnect (may need replacing or new seal in garden fitting). Blichmann Auto-sparge (flash!) and mashmaster thermometer (needs calibrating again). $230

 

Immersion, Whirlpool Chiller built by JoKing from Liberty Brewing. 50ft of 1/2in copper. Copper return for whirlpooling. Welded brass male disconnects. $100

 

 



 

 

Views: 1199

Replies are closed for this discussion.

Replies to This Discussion

Hey matey, im sold on the immersion chiller. give me a ring, 04-8019949.

RSS

© 2024   Created by nzbrewer.   Powered by

Badges  |  Report an Issue  |  Terms of Service