Want to place an ad email luke@realbeer.co.nz
$50+GST / month

RealBeer.co.nz

March 2014 Blog Posts (5)

Kauri Road Brewery 2.3.2

Dip tubes/inlets done, thanks to the kind lend of a pipe bender by Peter Smith – cheers!

Made short work of some bloody hard stainless, and good learning – last one is the best one.

kettle inlet/whirlpool:

HLT inlet:…

Continue

Added by Barry on March 30, 2014 at 8:16pm — 13 Comments

Kauri Road Brewery 2.3.1

Additional photos fwiw

Kettle interior

Mash tun interior

Pumps…

Continue

Added by Barry on March 19, 2014 at 8:14am — 2 Comments

Intro Posting

Hi Barry.

Sorry for the lack of contact - I have just resurfaced after being belted by an unexpected medical curve ball. 

Thanks for info about where to go for parts I will be chasing them up in the next couple of days.

As soon as I learn how I will post photos of some 'before and after' shots of the stripped and polished metal components from the Engine - really impressive result.

Cheers.

John M

 

Added by John Mildenhall on March 18, 2014 at 5:57pm — No Comments

Kauri Road Brewery 2.3

Significant progress this weekend, cyclone Lusi gifting me a fair amount of indoors time.

Got all my vessels completed, all that's left to get going is the electrickery (so still quite a bit then).

I had mixed experiences with some of the fittings, all four taps through the pots seemed to go together quite differently despite each pair of them being made up of identical parts inside and out.

But they all passed an initial leak test, not with vessels full but with me…

Continue

Added by Barry on March 16, 2014 at 8:25pm — 16 Comments

Srit Plate

Just finnished my first prototype but i'm not sure if its too fast, using a varible voltage adapter so it has like 4 speeds.

 
>

Added by Scott H on March 7, 2014 at 4:54pm — No Comments

© 2020   Created by nzbrewer.   Powered by

Badges  |  Report an Issue  |  Terms of Service