Tips needed: cask conditioning in a corny

Replies to This Discussion

Permalink Reply by Ralph on October 26, 2012 at 12:32pm

Yeh there is not much info on it.. I "cask" conditioned a pale ale for a mates party in a keg a year or so back. From memory I think I left mine about a week or two at summer ambient temp, and then chilled to about 12 degrees and started serving. I have no idea if this is the correct way to do it, but it tasted good!

I would think that once the secondary ferment is done that aging at about 12 degrees would probably give good flavour, and it should be only a couple of weeks needed to get the right flavours going? 

• ▶ Reply

Permalink Reply by Dougal on October 26, 2012 at 1:04pm

I'm wondering how long that secondary ferment will take? During primary the beer was down to terminal gravity in 4 days. I'm almost certain it'll be finished carbonating by now, but not sure whether I should have used a high temp like 22C for getting it there? It'll be conditioned and served at garage ambient (8-10C) anyway.

• ▶ Reply

Permalink Reply by Ralph on October 26, 2012 at 1:57pm

I dont know that there is any problem with using the 20 + deg ferment to carb it up. Are you thinking you should have done this slowly at celler temp?

I think it is most important to have a bit of time to smooth the flavours out once the secondary is done. If you did it warm then it might need a little longer smoothing. If you ferment it cool then it will take longer to ferment but might not take as long to smooth? Probably works out to the same sort of result either way I would think? I have not worked out if the flavours smooth better at celler temp or at 20ish deg. I assume you had it in primary for a couple of weeks before carbing in the keg? If so I would think either a couple of weeks at either temp should be enough to smooth out the little secondary ferment, plus finish off smoothing the original ferment. If it is only around the 4%, is resonably light in colour and has some hop flavour then it should be good for drinking pretty quickly?

• ▶ Reply

Permalink Reply by Dougal on October 26, 2012 at 3:06pm

Yeah, it should be okay, but I was curious about whether cask priming is similar to bottle priming in that the conditioning temperature has very little effect on flavour compared to the primary fermentation temp?

I wouldn't think that the 1968 would do that well at garage temps anyway as it seems to drop like a ton of bricks anywhere under 18C, so I have to carbonate it warm-ish. Really, I'm just hoping that as it's a 1.043 beer it won't need much conditioning time at all so I can hook up the handpull and start enjoying it :-)

• ▶ Reply