Chassis punch 1-1/4" Greenlee (or similar) - RealBeer.co.nz2024-03-29T10:21:45Zhttp://www.forum.realbeer.co.nz/forum/topics/chassis-punch-1-1-4-greenlee-or-similar?feed=yes&xn_auth=noCheers mate....I'm wanting to…tag:www.forum.realbeer.co.nz,2014-12-10:1500433:Comment:2140352014-12-10T06:40:43.123ZNathanhttp://www.forum.realbeer.co.nz/profile/Nathan
<p>Cheers mate....I'm wanting to put another element into my HLT that I control with a PID</p>
<p>If i find an element I will be in touch.</p>
<p>You keen for a brew swap?</p>
<p>Cheers mate....I'm wanting to put another element into my HLT that I control with a PID</p>
<p>If i find an element I will be in touch.</p>
<p>You keen for a brew swap?</p> Hi Nathan
Not sure about stan…tag:www.forum.realbeer.co.nz,2014-12-10:1500433:Comment:2138302014-12-10T03:58:57.972ZMatthew Vincenthttp://www.forum.realbeer.co.nz/profile/MatthewVincent
Hi Nathan<br />
Not sure about standard sizes for elements. 32mm rings a bell with other elements I've installed. Click on the link above and you'll see why I need these sizes.<br />
I've drilled a fair few holes in pots using a HS drill bit, a step drill bit and even a bi-metal holesaw - all of which I have recently read aren't ideal so I'm pretty excited to try out the chassis punch. Give me a yell if you want help with anything ... I might not have the answer(s) but should be able to point you in the…
Hi Nathan<br />
Not sure about standard sizes for elements. 32mm rings a bell with other elements I've installed. Click on the link above and you'll see why I need these sizes.<br />
I've drilled a fair few holes in pots using a HS drill bit, a step drill bit and even a bi-metal holesaw - all of which I have recently read aren't ideal so I'm pretty excited to try out the chassis punch. Give me a yell if you want help with anything ... I might not have the answer(s) but should be able to point you in the right direction if nothing else ☺ I spend a bit of time in Tara…tag:www.forum.realbeer.co.nz,2014-12-10:1500433:Comment:2140292014-12-10T00:37:16.108ZPatrickhttp://www.forum.realbeer.co.nz/profile/PatrickBish
<p>I spend a bit of time in Taranaki but I don't think a 63L kettle is going to fit in the overhead lockers!</p>
<p>I spend a bit of time in Taranaki but I don't think a 63L kettle is going to fit in the overhead lockers!</p> are these standard sizes for…tag:www.forum.realbeer.co.nz,2014-12-09:1500433:Comment:2139252014-12-09T22:54:15.804ZNathanhttp://www.forum.realbeer.co.nz/profile/Nathan
<p>are these standard sizes for elements?.......I am in NP and may require some help</p>
<p>are these standard sizes for elements?.......I am in NP and may require some help</p> If I lived in Auckland that w…tag:www.forum.realbeer.co.nz,2014-12-09:1500433:Comment:2138262014-12-09T22:08:22.301ZMatthew Vincenthttp://www.forum.realbeer.co.nz/profile/MatthewVincent
If I lived in Auckland that would be fine but ... I'm in New Plymouth. Give me a yell if ya ever down this way ☺
If I lived in Auckland that would be fine but ... I'm in New Plymouth. Give me a yell if ya ever down this way ☺ Would it be possible to bring…tag:www.forum.realbeer.co.nz,2014-12-09:1500433:Comment:2140252014-12-09T21:49:38.841ZPatrickhttp://www.forum.realbeer.co.nz/profile/PatrickBish
<p>Would it be possible to bring my kettle around to have a couple of holes done when you are doing yours? Are you in Auckland?</p>
<p>Would it be possible to bring my kettle around to have a couple of holes done when you are doing yours? Are you in Auckland?</p> I'm buying one tomorrow (thro…tag:www.forum.realbeer.co.nz,2014-12-09:1500433:Comment:2140822014-12-09T08:02:38.855ZMatthew Vincenthttp://www.forum.realbeer.co.nz/profile/MatthewVincent
<p>I'm buying one tomorrow (through work).</p>
<p>I've 'convinced' the mechanic in the workshop that he needs both a 1-1/4" chassis punch and a 2-1/4" bi-metal holesaw in his toolbox (after I've borrowed them of course).</p>
<p>The chassis punch is ~$40+GST and the holesaw is ~$20+GST.</p>
<p>I'm buying one tomorrow (through work).</p>
<p>I've 'convinced' the mechanic in the workshop that he needs both a 1-1/4" chassis punch and a 2-1/4" bi-metal holesaw in his toolbox (after I've borrowed them of course).</p>
<p>The chassis punch is ~$40+GST and the holesaw is ~$20+GST.</p> I'm in the same boat mate. If…tag:www.forum.realbeer.co.nz,2014-12-09:1500433:Comment:2139212014-12-09T07:45:00.923ZPatrickhttp://www.forum.realbeer.co.nz/profile/PatrickBish
I'm in the same boat mate. If there is another person looking for one we could do a group buy?
I'm in the same boat mate. If there is another person looking for one we could do a group buy?